Necktie making process

- Aug 30, 2018-

1, tie design

Yarn-dyed tie: Design or come up with patterns to have a certain regularity, and then use tie design software, according to pattern design can be used in fabric loom software or pattern.

Printed tie: The pattern has no specific provisions, as long as you can think of it, it can be printed, printing must first do a good film, that is, commonly known as film, and then made into a pattern

2, making necktie fabrics

Yarn-dyed tie: It is made of dyed silk by machine, so the fabric looks strong three-dimensional.

Printed tie: It is made of white fabric and printed with pigment. It feels soft, colorful and bright.

3. Cutting

First of all, cut the fabric into the shape of a tie. Note that it must be cut at a 45 degree angle. The fabric determines the length of the tie. Next, you must cut the lining of the tie, usually with polyester, silk or wool. The shape of the tie should be based on the lining, generally divided into straight belt, small bottle, large bottle, depending on individual preferences. Finally, cut the silk lining of the tie (that is, the fabric on the back of the tie) and the ordinary tie (or silk tie) here to make the brand mark, but now it is common to use the regular fine filament. Still have in order to embody the grade of tie, make silk with the same fabric as tie, so the fabric cost varies greatly.

4, workers processing necktie molding steps

Connect the fabric with a flat car, then combine the silk lining with the fabric, then put it into the lining, the ironing worker wraps the fabric around the lining, the sewing worker sews the tie fabric with the lining inside together (that is, a thread in the middle of the back of the tie), and irons the tie with steam to form it.

5, the last auxiliary process.

A trademark or tie is a fabric that is just like a tie and a necktie.